LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Windshield Side Garnish Molding
GM241992Courtesy of GENERAL MOTORS CORP.

Install the windshield side garnish molding (1) to the vehicle. Ensure that the plastic retainers are fully engaged.