Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use tape on the tool surface so that you do not damage the paint on the antenna mast.

Install the antenna mast to the antenna base.

Fig 1: Installing Fixed Antenna Mast

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Secure the antenna mast to the antenna base.
Tighten: Tighten the antenna mast to 5.5 N.m (49 lb in).