LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1330 (Entertainment System) >> Repair Instructions >> Coaxial Cable Replacement - Digital Radio >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Vehicle Retainers
    GM1318273Courtesy of GENERAL MOTORS CORP.
  1. Connect the 3 retainers to the vehicle.
  2. Fig 2: Coaxial Cable Connector
    GM1318285Courtesy of GENERAL MOTORS CORP.
  3. Connect the coaxial cable connector to the XM receiver.
  4. Fig 3: Antenna Cable Connector
    GM1318275Courtesy of GENERAL MOTORS CORP.
  5. Connect the antenna cable connector to the XM antenna cable.
  6. Install the rear dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
  7. Engage the rear headliner retainers.
  8. Install the right rear assist handle. Refer to Assist Handle Replacement in Interior Trim.
  9. Install the right rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.