LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Manual Transmission - MTN - Introduction) >> Repair Instructions >> Gearshift Lever Case Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Element Replacement in Engine Electrical.
  2. Disconnect the shift cables.
  3. Remove the 4 gear shift guide case bolts.
  4. Remove the gear shift guide case.
  5. Remove the gasket.
  6. Remove the 2 gear shift guide case bracket bolts.
    IMPORTANT: When removing the shifting bracket notice that there is a select lever bushing and that it must be replaced in its original position, or incorrect shifting may occur.
  7. Remove the gear shift guide bracket.
scientia non olet · About LEMON Manuals