Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable, then the positive battery cable from the battery.
- Remove the battery hold down bracket bolt and nut.
- Remove the battery bracket.
- Remove the battery and the battery tray.
- Disconnect the MAF connector.
- Disconnect the hoses from the air cleaner case assembly.
- Remove the air cleaner hose and cap assembly.
- Remove the air filter.
- Remove the air cleaner lower box bolts.
- Remove the air cleaner box.
- Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical - 1.8L.
- Remove the transaxle left mount through bolt.
- Remove the bolts and the left transaxle mount.
- Remove the transaxle bracket bolts and bracket.
CAUTION:
Refer to Battery Disconnect Caution in Cautions and Notices.