LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Automatic Transmission - Mu4 (Introduction, Service & Replacement)) >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the filler tube into the transaxle. Seat the filler tube fully.
  2. Install the fluid fill tube bracket bolt into the fluid filler tube bracket.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the filler tube bracket bolt.

    Tighten:  Tighten the filler tube bracket bolt to 5.5 N.m (49 lb in).

  4. Install the fluid level indicator into the filler tube.
  5. Refill the transaxle, as necessary Refer to Transmission Fluid Checking Procedure .
scientia non olet · About LEMON Manuals