LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Trim Plate Replacement - Front Floor Console >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Console Trim Plate, Center A/C Control Knob And Screw
    GM834948Courtesy of GENERAL MOTORS CORP.
  1. Remove the manual transmission shift knob, if equipped.
  2. Remove the center A/C control knob (3).
  3. Remove the screw (1).
  4. Using a taped flat bladed tool, gently pry and release the retaining clips which secure the front floor console trim plate (2) to the front floor console assembly.
  5. Disconnect the following components:
    • The 2 cigar lighter electrical connectors
    • The accessory power receptacle electrical connectors
  6. Remove the cigar lighter assembly, if necessary. Refer to Cigar Lighter Housing Replacement - Floor Console in Power Outlets.
  7. Remove the accessory power receptacle, if necessary. Refer to Accessory Power Receptacle Replacement - 115 Volt AC - Instrument Panel (I/P) in Power Outlets.
scientia non olet · About LEMON Manuals