LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cluster Assembly, Lower Clips And Screw
    GM835522Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the instrument cluster assembly (2).
  2. Install the cluster assembly (2) to the instrument panel assembly. Secure the assembly with the screw (1) and the 2 clips (3).
  3. Install the IP cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
scientia non olet · About LEMON Manuals