LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Instrument Panel Components
    GM622062Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper instrument panel assembly. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  2. Remove the lower instrument panel assembly. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower .
  3. Remove the following components from the instrument panel (2):
    • The right I/P outer air outlet
    • The plastic retainers
    • The left I/P outer air outlet
    • The screws
    • The wire harness retainers
    • The instrument panel wiring harness (5)
scientia non olet · About LEMON Manuals