LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Console Shift Boot Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transaxle Control Lever Knob, Trim Plate And Shift Boot
    GM835465Courtesy of GENERAL MOTORS CORP.
  1. Install the manual transaxle shift boot (2) to the front floor console trim plate (3). Ensure that the retaining tabs are fully engaged.
  2. Install the front floor console trim plate (3). Refer to Trim Plate Replacement - Front Floor Console .
  3. Install the manual transmission control lever knob (2) by turning in a clock wise direction.