LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper instrument panel assembly. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  2. Remove the lower instrument panel assembly. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower .
  3. Remove the connector housing bracket from the right I/P center support brace.
    4. Fig 1: Center Support Bracket Components
    GM844460Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the vehicle:
    • The left brace nut (10)
    • The right brace nut (5)
    • The left brace bolt (8)
    • The right brace bolt (7)
    • The left I/P center support brace (9)
    • The right I/P center support brace (6)
scientia non olet · About LEMON Manuals