LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cluster Retainer And Instrument Cluster Lens
    GM432048Courtesy of GENERAL MOTORS CORP.
  1. Install the instrument cluster lens (2) to the instrument cluster retainer (1). Ensure that the locking tabs are fully engaged.
    2. Fig 2: Instrument Cluster Case And Instrument Cluster Retainer
    GM432042Courtesy of GENERAL MOTORS CORP.
  2. Align the cluster retainer (2) with the cluster lens attached onto the guide pins and install the retainer to the instrument cluster case (1). Ensure that the locking tabs are fully engaged.
  3. Install the instrument cluster assembly. Refer to Instrument Panel Cluster (IPC) Replacement .
scientia non olet · About LEMON Manuals