Conditions for Setting the DTC
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- DTC B1185 will set when the SDM detects a low resistance condition in the IP module deployment loop.
- DTC B1186 will set when the SDM detects a high resistance condition in the IP module deployment loop.
- DTC B1187 will set when the SDM detects a short to ground in the IP module deployment loop.
- DTC B1188 will set when the SDM detects a short to voltage in the IP module deployment loop.