Conditions for Setting the DTC

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

DTC B0110 will set when the SDM detects a low resistance condition in the side impact module - RF deployment loop.
DTC B0111 will set when the SDM detects a high resistance condition in the side impact module - RF deployment loop.
DTC B0112 will set when the SDM detects a short to ground in the side impact module - RF deployment loop.
DTC B0113 will set when the SDM detects a short to voltage in the side impact module - RF deployment loop.