LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1323 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Brace Replacement (LNK) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Cover, Generator Brace, Nuts And Bolts
    GM840474Courtesy of GENERAL MOTORS CORP.
  1. Remove the three bolts (3) and one nut (2) form the engine cover (1).
  2. Remove the engine cover (1)
  3. Remove the two bolts (6) from the generator brace (4).
  4. Remove the generator brace (4) from the vehicle.