LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Turn Signal Lamp Bulb Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tail Lamp Components
    GM819965Courtesy of GENERAL MOTORS CORP.
  1. Install the turn signal lamp bulb (6) to the lamp socket (5).
  2. Install the turn signal lamp socket (5) to the tail lamp (7).
  3. Install the rear compartment trim panel (4) to the vehicle.
  4. Close the rear compartment lid.