LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Instrument Panel (I/P) Dimmer Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Switch Plate, Electrical Connector And Dimmer Switch
    GM843695Courtesy of GENERAL MOTORS CORP.
  1. Remove the left I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left .
  2. Disconnect the electrical connectors.
  3. Using a taped flat bladed tool, gently pry and release the clips around the dimmer switch (3).
scientia non olet · About LEMON Manuals