LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stop Lamp Components
    GM821947Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Remove the 2 high mounted stoplamp cover push-in retainers (3).
  3. Remove the high mounted stoplamp center cover (4).
  4. Remove the 2 screws (5) from the stop lamp (6).
  5. Remove the stoplamp (6).
  6. Remove the lamp socket, from the stoplamp (6) by turning counter clockwise, if necessary.
  7. Remove the bulb from the lamp socket, if necessary.
  8. Remove the 2 nuts (1) and the stoplamp cover (2).
scientia non olet · About LEMON Manuals