LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Headlamp Assembly or Headlamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Halogen Bulb Caution in Cautions and Notices.
  1. Open the hood.
  2. Remove the rubber cover and socket from the headlamp.
    3. Fig 1: Retainer Clip, Composite Headlamp And Bulb
    GM242318Courtesy of GENERAL MOTORS CORP.
  3. Release the retainer clip (1) holding the bulb (2) by pressing down and moving the metal retainer away from the composite headlamp (3).
  4. Remove the bulb (2) from the composite headlamp (3), if necessary.
  5. Remove the front fascia. Refer to Fascia Replacement - Front Bumper .
    6. Fig 2: Composite Headlamp Bolts
    GM815884Courtesy of GENERAL MOTORS CORP.
  6. Remove the 3 bolts which secure the composite headlamp.
  7. Remove the sidemarker bulb electrical connector.
  8. Remove the sidemarker bulb, if necessary.
  9. Remove the composite headlamp assembly from vehicle.
scientia non olet · About LEMON Manuals