LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Door Jamb Switch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Mounting Screw And Door Jamb Switch
    GM241441Courtesy of GENERAL MOTORS CORP.
  1. Connect the rear door jamb switch electrical connector.
  2. Install the rear door jamb switch (2) to the door jamb. Secure the door jamb switch with the screw.
scientia non olet · About LEMON Manuals