LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Door Jamb Switch Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Door Jamb Switch And Mounting Bolt
    GM239369Courtesy of GENERAL MOTORS CORP.
  1. Connect the front door jamb switch electrical connector.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the switch (1) to the door jamb. Secure the switch with the mounting bolt.

    Tighten:  Tighten the front door jamb switch mounting bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals