LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Lighting Systems) >> Repair Instructions >> Daytime Running Lamps (DRL) Ambient Light Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ambient Light Sensor And I/P Assembly
    GM834000Courtesy of GENERAL MOTORS CORP.
  1. Using a flat bladed tool, release the 2 retaining tabs that secure the ambient light sensor (1).
  2. Disconnect the ambient light sensor electrical connector.
  3. Remove the ambient light sensor (1) from the I/P assembly (2).
scientia non olet · About LEMON Manuals