Activating System
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect driver side impact air bag module connector and install Connector Position Assurance (CPA) clip. See Figure. Connect passenger-side air bag module connector, located to right of steering column and install CPA clip. See Figure.
- Connect driver-side air bag module connector and install CPA clip. See Figure. Install driver-side knee bolster. Install AIR BAG fuse in fuse block. Install right-side instrument panel access hole cover. Check SIR system for proper operation. See SYSTEM OPERATION CHECK .