Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Lightly coat the O-ring with mineral base 525 viscosity refrigerant oil.NOTE: Refer to FASTENER NOTICE .
- Install the service port valve.
Tighten
Tighten the valve to 11 N.m (98 lb in).
- Evacuate and charge the system. Refer to Refrigerant Recovery and Recharging .
- Leak test the A/C service port. Refer to Leak Testing .
- Install the service port cap.