LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (Transfer Case - NVG 246-NP8 (Two Speed Automatic)) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transfer Case & Case Adapter
    GM715726Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement .
    3. Fig 2: Removing Transfer Case Input Shaft Seal
    GM678215Courtesy of GENERAL MOTORS CORP.
  3. Remove the transfer case input shaft seal.
scientia non olet · About LEMON Manuals