LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the lift gate.
  2. Remove the trim panel lock cover (1).
  3. Remove the service hole trim cover (2) from the liftgate trim panel (4).
  4. Use J 38778  to disengage the fasteners from the trim panel.
  5. Remove the trim panel (4) from the liftgate (3).
scientia non olet · About LEMON Manuals