LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Body Rear End) >> Repair Instructions >> Lock Striker Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lift gate sill trim plate. Refer to DOOR SILL PLATE REPLACEMENT - LIFT GATE in Interior Trim.
  2. Remove the following components from the vehicle:
    • The 2 bolts (2)
    • The rear lift gate striker (1)
Fig 1: Removing Rear Lift Gate Striker Bolts
G01435029Courtesy of GENERAL MOTORS CORP.