LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Body Rear End) >> Repair Instructions >> Latch Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Liftgate Latch From Liftgate
G01434993Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Remove the liftgate trim panel. Refer to TRIM PANEL REPLACEMENT - LIFT GATE  .
  3. Disconnect the latch cable (1).
  4. Disconnect the electrical connector (5) from the liftgate latch (3).
  5. Disconnect the rod (2) from the lock cylinder. Refer to LOCK CYLINDER REPLACEMENT - LIFT GATE  .
  6. Remove the bolts (4) from the liftgate latch (3).
  7. Remove the liftgate latch (3) from the liftgate.