LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate. Refer to LIFT GATE REPLACEMENT  .
  2. Remove the headliner. Refer to HEADLINER REPLACEMENT in Interior Trim.
  3. Use a grease pencil to mark the liftgate hinge position to the body.
  4. Remove the hinge retaining nuts from the vehicle roof.
  5. Remove the hinge from the vehicle.
    Fig 1: Removing Hinge Retaining Nuts From Vehicle Roof
    G01435009Courtesy of GENERAL MOTORS CORP.