LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1313 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Install the windshield side garnish molding (1) to the vehicle. Ensure that the plastic retainers are fully engaged.

Fig 1: Installing Windshield Side Garnish Molding To Vehicle
G01434962Courtesy of GENERAL MOTORS CORP.