LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Seat Back Trim Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a flat-bladed tool, disengage the 2 lower plastic retainers (3) from the trim panel (1).
  2. Once plastic retainers (3) are disengaged, pull down on trim panel (1).
  3. Remove seat back trim panel (1) from seat back.
    Fig 1: Disengaging Lower Plastic Retainers From Trim Panel
    G01434885Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals