LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Seat Back Trim Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install trim panel (1) to the rear seat back, and slide upward until plastic hooks (2) engage.
  2. Press firmly on lower trim panel (1) until lower plastic retainers (3) fasten.
    Fig 1: Installing Trim Panel To Rear Seat Back & Sliding Upward Until Plastic Hooks Engage
    G01434886Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals