LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Rear Outer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back cushion. Refer to SEAT BACK REPLACEMENT - REAR SPLIT FOLDING  .
  2. Remove the following components from the vehicle:
    • The 1 bolt which secure the rear seat back cushion outer hinge
    • The rear seat back cushion outer hinge (1)
    Fig 1: Removing Rear Seat Back Cushion Outer Hinge
    G01434921Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals