LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front (Inboard) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor rear console. Refer to CONSOLE REPLACEMENT - REAR FLOOR in Instrument Panel, Gages and Console.
  2. Remove the following components from the front seat inboard adjuster:
    • The 2 screws (1)
    • The inboard adjuster finish cover (4)
    Fig 1: Removing Inboard Adjuster Finish Cover & Screws
    G01434891Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals