LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front (Inboard) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inboard adjuster finish cover (4) to the front seat inboard adjuster. Secure the cover with the 2 screws (1).
  2. Install the front floor rear console. Refer to CONSOLE REPLACEMENT - REAR FLOOR in Instrument Panel, Gages and Console.
    Fig 1: Installing Inboard Adjuster Finish Cover & Screws
    G01434892Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals