LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the head restraint guides to the seat back cushion, if removed.
  2. Push in the tabs (2) on the head restraint guides.
  3. Install the head restraint (1).
    Fig 1: Pushing In Tabs On Head Restraint Guides
    G01434895Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals