LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1310 (Door System, Mirror System & Window System) >> Repair Instructions >> Lock Cylinder Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front side door water deflector. Refer to WATER DEFLECTOR REPLACEMENT - FRONT DOOR  .
  2. Remove the hole plug (2).
  3. Remove the following components from the outside door handle (3):
    • The torx screw
    • The door lock cylinder (1)
Fig 1: Removing Hole Plug And Door Lock Cylinder Torx Screw
G01434701Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals