LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1309 (Body Front End) >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the hood.
  2. Remove the following components from the hood (2):
    • The 8 plastic retainers
    • The hood insulator (1)
      Fig 1: Removing Hood Insulator From Hood
      G01434543Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals