LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1309 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the hood.
  2. Remove the hood hold-open rod (1) from the retaining clip (3).
  3. Rotate the hold-open rod (1) from the normal rest position 90 degrees counterclockwise.
  4. Pull forward and remove the hold-open rod (1) from the grommet (2).
    Fig 1: Removing Hood Hold-Open Rod From Retaining Clip
    G01434545Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals