LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1309 (Body Front End) >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hood. Refer to HOOD REPLACEMENT  .
  2. Remove the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT  .
  3. Remove the left front fender, if necessary. Refer to FENDER REPLACEMENT - FRONT - LEFT  .
  4. Remove the right front fender, if necessary. Refer to FENDER REPLACEMENT - FRONT - RIGHT  .
  5. Mark the position of the hood hinges to ease assembly.
  6. Remove the hinge bolts from the hood.
  7. Remove the hood hinge (1).
    Fig 1: Removing Hood Hinge
    G01434525Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals