LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1309 (Body Front End) >> Repair Instructions >> Hood Bumper Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hood front bumper (1). Turn the bumper all the way down.
  2. Perform the vertical hood adjustment. Refer to HOOD ADJUSTMENT  .
  3. Lower the hood.
    Fig 1: Installing Hood Front Bumper
    G01434516Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals