Fore-Aft Adjustment
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the hood.
- Support the hood.
- Loosen the hood (1) mounting bolts.NOTE: Refer to FASTENER NOTICE .
- Adjust the hood to the front fender clearance gap (1) to between 2.5-5.5 mm (0.10-0.22 in) on each side of the hood. Tighten the hood mounting bolts.
Tighten
Tighten the hood mounting bolts to 13 N.m (9 lb ft).
- Remove the hood support.
- Lower the hood.