LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1306 (Exterior Trim) >> Repair Instructions >> Flare Replacement - Front Fender >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws (3) from the rear lower fender flare (2).
  2. Disengage the fender flare plastic retainers from the fender (1).
  3. Remove the fender flare (2) from the fender (1).
  4. Remove the plastic retainers from the fender flare, if necessary.
    Fig 1: Removing Plastic Retainers From Fender Flare
    G01434285Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals