LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1304 (Theft Deterrent System) >> Description and Operation >> Theft Systems Description and Operation >> Ignition Switch Disarm Function

Ignition Switch Disarm Function

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following steps in order to verify that the ignition disarm function operates:

  1. Stay in the vehicle.
  2. Place the system in the armed state.
  3. Wait for the SECURITY telltale to flash. The system is armed when the SECURITY telltale flashes.
  4. Cycle the ignition switch from the LOCK position to the RUN position. Return the ignition switch to the LOCK position.
  5. Open any door.
scientia non olet · About LEMON Manuals