LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Trim Plate Replacement - Front Floor Console >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the accessory power receptacle, if removed. Refer to ACCESSORY POWER RECEPTACLE REPLACEMENT in Wiring Systems.
  2. Install the cigar lighter assembly, if removed. Refer to CIGAR LIGHTER REPLACEMENT  .
  3. Connect the following components:
    • The 2 cigar lighter electrical connectors
    • The accessory power receptacle electrical connectors
  4. Install the front floor console trim plate (2) to the front floor console assembly. Ensure that the retaining clips are fully engaged.
  5. Install the center screw (1).
  6. Install the center A/C control knob (3).
  7. Install the manual transmission shift knob, if equipped.
    Fig 1: Installing Front Floor Console Trim Plate
    G01434025Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals