LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Shift Boot Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transaxle control lever knob (1) from the manual transaxle control lever by turning in a counterclockwise direction.
  2. Remove the front floor console trim plate (3). Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE  .
  3. Remove the manual transaxle shift boot (2) from the front floor console trim plate (3) by pushing out to disengage the boot from the underside of the front floor console trim plate.
    Fig 1: Removing Manual Transaxle Shift Boot Console
    G01434018Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals