LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Shift Boot Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the manual transaxle shift boot (2) to the front floor console trim plate (3) Ensure that the retaining tabs are fully engaged.
  2. Install the front floor console trim plate (3). Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE  .
  3. Install the manual transmission control lever knob (2) by turning in a clock wise direction.
    Fig 1: Installing Manual Transaxle Shift Boot Console
    G01434019Courtesy of GENERAL MOTORS CORP.