LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the instrument cluster lens (2) to the instrument cluster retainer (1). Ensure that the locking tabs are fully engaged.
    Fig 1: Installing Instrument Cluster Lens To Cluster Retainer
    G01433995Courtesy of GENERAL MOTORS CORP.
  2. Align the cluster retainer (2) with the cluster lens attached onto the guide pins and install the retainer to the instrument cluster case (1). Ensure that the locking tabs are fully engaged.
  3. Install the instrument cluster assembly. Refer to INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT  .
    Fig 2: Installing Instrument Cluster Retainer With Instrument Cluster Lens
    G01433996Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals