Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use tape on the tool surface so that you do not damage the paint on the antenna mast.

Install the antenna mast to the antenna base.
NOTE: Refer to FASTENER NOTICE .
Secure the antenna mast to the antenna base.
Tighten

Tighten the antenna mast to 5.5 N.m (49 Ib. in).

Fig 1: Installing Antenna Mast To Antenna Base
Courtesy of GENERAL MOTORS CORP.