LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1300 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE .
  1. Install the windshield wiper arm (3) to the windshield wiper transmission. Secure the arm with the nut (2).

    Tighten 

  2. Tighten the windshield wiper arm nut to 20.5 N.m (15 lb ft).
  3. Install the plastic nut cover (1) to the wiper arm (3).
    Fig 1: Installing Wiper Arm
    G01433849Courtesy of GENERAL MOTORS CORP.